Type-C to USB 2.0 Type B Male Cable (P/N: CW00-0101-AKS)

Type C to Standard USB 2.0 Type B Data Transfer Cable

Type-C to Micro USB 2.0 Male Data and Charging Cable (P/N: CW00-0102-AKS)

USB Type-C connector for syncing data and charging

Type C OTG to USB 3.0 Type A Female Cable (P/N: CW00-0103-AKS)

Standard USB3.0: The Maximum Data Transfer Rate up to 5Gbps

Type C Male to Type C Male Data and Charging Cable (P/N: CW00-0104-AKS)

USB Type-C connector for syncing data and charging

Type C to USB 3.0 Type A Male Data and Charging Cable (P/N: CW00-0105-AKS)

Standard USB3.0: The Maximum Data Transfer Rate up to 5Gbps

Type C Male to USB 3.0 Micro Type B Male Data and Charging Cable (P/N: CW00-0107-AKS)

Standard USB3.0: The Maximum Data Transfer Rate up to 5Gbps

Type C to USB 3.0 Type A Female OTG Adapter (P/N: CN00-0034-AKS)

Akust USB 3.1 TYPE-C to USB 3.0 OTG Adapter has the great performance of inter-connecting quality. The user has a lot of option to apply the current USB’s devices to the USB 3.1 TYPE-C devices just via this adapter. For example, the standard USB 2.0/3.0 Flash Drive can transform into USB 3.1 TYPE-C to operate, instead of buying any new specific USB 3.1 TYPE-C USB Flash Drive.

SD4.0 SDXC 2-in-1 to USB 3.0 Card Reader (P/N: CN00-0039-AKS)

Akust SD4.0 SDXC 2-in-1 to USB 3.0 Card Reader has the great performance of data transfer speed. The user can apply the SD card and microSD card to this card reader. Even the latest new model of UHS-II and UHS-I cards. This Card Reader has 10 times higher speed than the USB 2.0 card readers. Small size for easy carry and apply to the PCs or Laptop for high capacity photos, videos, files or any Data read-&-write.

2-in-1 Reversible Micro USB to USB Type A / Micro USB Data and Charging Cable (P/N: CW00-0116-AKS)

Innovative Reversible Micro USB Head Without Directionality

Adhesive Wre Mount Cable Tie (P/N: AV01-0024-AKS)

The Akust Wire Management – Wire Mount comes as a six pack and has pre-installed self adhesive tape on the bottom for easy installation. The tinplate material makes bending and press into place a very nice feature and makes these reusable.

Wire Mount Cable Tie (P/N: AV01-0025-AKS)

The Akust Wire Management – Wire Mount comes as a ten pack and has a push head design so you can insert into case panels and other surfaces with a ~4.8mm hole. These cable management clips making routing wires cables and even tubing much easier and are fully reusable.

PE Spiral Wrapping Bands 19mm x 1.0M (P/N: AV01-0026-AKS)

Heat-Shrinkable Tubing 2:1 Heat Shrink Tube 2.5mm (3/32 inch) (P/N: AV01-0027-AKS)

Heat-Shrinkable Tubing 2:1 Heat Shrink Tube 6.4mm (1/4 inch) (P/N: AV01-0028-AKS)

Self Adhesive Cable Clip, Wire Clips with Optional Screw Mount (P/N: AV01-0031-AKS)

Self Adhesive Cable Clip (P/N: AV01-0048-AKS)

Adhesive Cable Clips Cord Management (P/N: AV01-0049-AKS)

7 Channel Adhesive Cable Holder Plug Mount (P/N: AV01-0050-AKS)

Push Mounts Cable Clips, Fits 1/8" (3.3mm) Hole (P/N: AV01-0051-AKS)

Adhesive Cable Clips Wire Cable Holder Clamps (P/N: AV01-0053-AKS)

Flat Cable Mount, Adhesive Cable Clips (P/N: AV01-0055-AKS)

Self Adhesive Wire Management, Cable Mounts (P/N: AV01-0061-AKS)

Self Adhesive Wire Management with Push Cable Tie Mount (P/N: AV01-0062-AKS)

The Akust Wire Management – Cable Tie Mount is a reusable set of 10 wire tie downs with matching snap tie wraps. These can be positioned in tight quarters and make a great wire management tool due to their reusable nature!

Adhesive Flat Cable Clips Wire Cable Clamps (P/N: AV01-0065-AKS)

The Akust Wire Management – Flat Cable Clamp has a stick and peel 3M base for easy installation. The reusable snap down clamp can handle multiple cables and is a great design for the top or bottom of chassis to hide cable management.